# This file is part of DXF2GCODE. # # DXF2GCODE is free software: you can redistribute it and/or modify # it under the terms of the GNU General Public License as published by # the Free Software Foundation, either version 3 of the License, or # (at your option) any later version. # # DXF2GCODE is distributed in the hope that it will be useful. Dxf2G is a simple program that converts DXF 2D files into.ngc G-code files that can be used in programs such as Emc2 (www.linuxcnc.org).

• Trusted Windows (PC) download DXF2GCODE 2017.9.25. Virus-free and 100% clean download. Get DXF2GCODE alternative downloads.
• Dxf2gcode - A program to convert a dxf drawing into G-Code #opensource.
• Download and install a trial version of ABViewer. 32-bit ABViewer 64-bit ABViewer. Open your DWG or DXF file. If you need to edit it, use the tools on the Editor tab. On the Output tab select the CAD to G-code command. In the opened G-code window configure all necessary settings.

• 7Complete Shakedown
  • 7.1Piercing

The program converts a 2D dxf drawing to CNC machine compatible G-Code.

Let's cut wheel mounting plates for the open source tractor with the torch table:

In the video, DXF2Gcode is used. Installation Instructions for Linux.

• Note: forget about the installation instructions. Just download the python script, run it, import the DXF, export the g-code file (.ngc). The instructions complicate the issue for novices.

1. Download python DXF2gcode conversion script onto your desktop.
2. Go in to Terminal
3. Navigate to the directory where you downloaded the script.

• • For Factor e Farm implementation - cd gcode

1. Run the script from within the directory where the script is located: python scriptname.py

• • For Factor e Farm implementation - python d2g.py

1. Bingo. The GUI for DXF2gcode runs.
2. Read the DXF from the File menu in the DXF 2 G-Code script.
3. Export the DXF into .ngc (G-Code) format.
4. The .ngc file is readable by EMC2

In other words: Generate your CAD in QCAd like in this example:

Import the QCad image into DXF 2 G-Code:

Import the g-code file into EMC2:

Dxf2gcode Free Download

Open Source CNC Torch Table Shakedown from Open Source Ecology on Vimeo.

• To assure that the object that is being fabricated has the desired dimensions, start with an inch scale in QCad for the USA
  • Note: DXF 2 G-Code displays a bunch of import errors when importing Will's sample DXF generated from Solidworks; just click through all the errors, and the image appears at the end.
  • Note: Why does DXF 2 G-Code generate the toolpath twice?
  • Note: Change G21 to G20 for mm -> inch scale within DXF 2 G-Code
  • Eliminate the z feeds since we don't use the z axis for plate torching.

Note that we are in a 2-hose machine torch configuration with manual cutting gas toggle.

As it stands, the toolchain for open source torch cutting is quite disintegrated. It turns out that the above code, while in principle correct, does not address the practical considerations of piercing metal. For example, when one wants to torch out a hole - one should not pierce the metal right on the cutting line, because piercing is a messy operation. Instead, one wants to pierce inside a hole, and subsequently move to the circle contour. Moreover, one wants to preheat the metal not by standing in place, but oscillate back and forth to heat the metal more evenly.

It further emerges that the fuel flow rate should decrease after metal ignition, as the fuel gas is important primarily in preheating, not in cutting.

Moreover, the width of the cut needs to be considered, so the actual toolpath needs to be modified by about 1/16 smaller diameter size for circles when using a #2 cutting tip. Thus, finetuning is a precise matter - if one is interested in precise cuts such as small bolt holes.

Piercing

To address the proper piercing issue, Vann Miller has written a correction script. This script does 3 things. First, it takes out the z values generated by the DXF to G-code Converter (not needed in a 2-axis motion system at hand). Second, it starts a pierce by moving towards the center of a hole. Third, it rotates the torch around a small radius (.05') during preheating. The number of rotations is currently 8, but one should be able to modify this.

Download

To run this correction script, download the coverter file - make it executable, and run it from command line. Here's Version 0.22 of vanngcode.php - [1] . This works based on correct understanding of G2 syntax. It also ignores arcs, and only pierces circles on their interior.

php vanngcode.php <file.ngc>

Dxf2gcode Download

Where <file.ngc> is the name of the ngc file. The converter will eliminate Z coords and add preheating/piercing to circles.

Also, now the interior offset can be set via the command line, e.g:

... would offset 0.3 inches into the circle before piercing. The default offset is .2 in inch units. For small holes, such as 1/4', the value should be decreased to 0.1, which will pierce just about in the middle.

Feed Rates

A feed rate of 10 mm/min worked well for 1/2' thick metal. The number of rotations in preheating was __________.

For 3/16' metal, the feed rate is _____ and the preheating rotation number is _______________.